• High intensity X-ray Source

• Very low cross talk

• Highly efficient water cooling of anode and anode housing

• Twin anode: Al/Mg coating,other anode materials on request
• Maximum Power, Mg: 350 Watt, Al: 500 Watt
  
• Cross talk: < 0.35%
• Magnetic filed at sample below 0.5µT
• The X-ray inner housing is very efficiently water-cooled in order to reduce the damage of the sample by
  thermal effects during operation.
• The RS 40B1 has double high voltage protection. When the housing is open high voltage can no to be switch on. The
  housing is hermetically sealed.
• Cooling Box CB01
• 50 mm, 75 mm or 100 mm Z-retraction mechanism available as option
• Maximum Bakeout Temperature: 250°C
• Water cooling requirements: 3.5 to 5 bar @ 3.5 l/min
• Differential pumping port: 2.75"OD (NW38CF)
• Quick connectors for water couplings and HT cable

The ER01 emission regulator is used to control the emission current of the x-ray tubes RS 40 B1. This emission regulator can be used as independent stand alone unit which can be connected to any HV power supply.

• Maximum Power: 600 Watt (15kV, 50 mA)
• Display of anode voltage, emission, power, power limit, filament current
• Safety interlocks for water flow, vacuum and HT-protection
• Power unit to cooling controller interconnect cable
• Full remote control by analog / digital interfaces
• Dimensions: 19" (W) x 132 mm (H), weight: 20 kg
• Power: 230/115 V, 4/6 A, 50/60 Hz
  

  
  Cooling Control Box CB01
  

• Display of flow rate / water pressure
• HT protection by closed metal cover
• Filter and water flow valve
• Interlock output for water flow
• Protected PTFE water pipes
• 5m flexible services conduit
• Dimensions: 19" (W) x 132 mm (H)

News | Home | Products | Site Map | Contact Info | E-Mail Us