BioJet Macro-Molecular Beam Injector System,for time-resolved experiments and formation of high-intensity macro-molecular beams, with the following specifications:
BioJet Macro-Molecular Beam Injector System,for time-resolved experiments and formation of high-intensity macro-molecular beams, with the following specifications:
The Macro-Molecular Beam Injector is designed to produce a collimated, scanable, high flux molecular beam (organic molecules, DNA etc.) with well controlled parameters. It is further equipped with effective heating to prevent material condensation at the orifice. The electro-spray inlet system and source design fit the production of macro-molecular beams.UVH compatible conditions at the end stage of the molecular beam injector are established with a multi-stage pumping system. The differentially pumped pressure system (2 additional differential pumping stages) guarantees a final pressure at the heatable output aperture (SEM aperture, exchangeable, Standard Material = Molybdenum) of 2.10-9 mbar. A shutter and an optical chopper are included in order to control/modulate the gas beam flux
Ionization Technique and Beam Introduction System:
Power Unit for BioJet Molecular Beam Injector:
Heatable and Exchangeable Output Aperture for Material Condensation Prevention
Beam Chamber (stainless steel) for Beam Generation and Beam Forming:
Bench and Bake Out Ovens:
Beam Shutter and Optical Chopper for Control and Modulation of the Molecular Beam Flux:
Heating Facility for Direct Beam Inlet System:
News | Home | Products | Site Map | Contact Info | E-Mail Us
(PDF)